interSeptor Pro - Data Centre Environmental Monitoring
interSeptor Pro is an advanced ethernet Data Centre and Rack Monitoring System that monitors room and rack environmental conditions and provides early warning alerts in the event of air-conditioning failure and other conditions that may threaten business continuity.
In addition, interSeptor Pro can also be used to extensively record temperature/humidity data for graphing and analysis helping you not only to ensure your IT equipment is running under optimal conditions but also to quickly identify where air-conditioning systems could be run more efficiently to maximise energy savings.
Need fewer sensors? The cost-effective interSeptor is ideal for smaller monitoring requirements & has capacity for up-to 2 x Temperature/Humidity Sensors and 4 x Go-Probe Sensors. Find Out More…
Designed for ease-of-installation and use, interSeptor Pro is available in 3 models:
Combined with early-warning alerts via Email, SNMP, SMS and/or our unique automated Voice telephone messaging facility (Alert Centre), interSeptor Pro will help ensure that IT rooms and racks are operating at optimal conditions and that remedial action can be taken quickly in the event of a rack temperature problem or any other alarm condition.
The unique design of the interSeptor Pro means that 2 additional Go-Probe alarm sensors (water leak, security, smoke, power, etc.) can be connected to each temperature/humidity probe. This means the 24-port device, for instance, has the capacity to support an incredible 48 additional alarm sensors, giving complete long-term flexibility in terms of sensor deployment.
interSeptor Pro can be monitored and managed 'out-of-the-box' via its comprehensive browser interface.
Key features of the web-browser interface include:
A java window can be launched via the interSeptor Pro browser interface to display real-time meters or graphs for each sensor being monitored, as well as for historial and extended historical data recorded by the interSeptor Pro.
- Supports up to 24 x Temperature/Humidity Sensors
- Supports up to 48 x Go-Probe Alarm Sensors
- Optional GSM modem for SMS alerts
- Email, SNMP alerts
- Automated telephone voice alerts also available
- Web browser interface for remote monitoring
- Monitoring also possible using an SNMP-based Network Management System & Telnet
- Up to 6 Relay Outputs for automated, on-site, crisis management
- On-board logging (network independent)
- On-board graphing facility
- User-configurable alarm thresholds
- Range of optional sensors available
- Cat5 cabling to Temperature/Humidity probes for maximum user flexibility
The interSeptor Pro can use any standard SMTP Mail Server to relay email alerts in the event of alarm conditions. If you use an encrypted hosted email exchange - such as Office 365 or Gmail - please contact us for further information and to confirm compatibility before purchasing.
High and low warning and critical temperature and humidity thresholds can be configured in the interSeptor to ensure alarms are raised when room or rack conditions are abnormal. The hysteresis configuration facility ensures that alarms are not continually triggered when levels are 'floating' around the configured thresholds.
The interSeptor water leak sensor is supplied with 3m or 18m of leak detection cable. The cable can be run under air conditioning units, in ceiling voids, under raised floors, under pipes, and around room perimeters to provide a comprehensive, easy-to-install, leak detection facility.
The unique sensor connectivity design of the interSeptor facilitates installation and monitoring of the smoke detector, especially on ceilings. The cable connection need only be run from the temperature/humidity sensor which will typically already be installed at an elevated level.
The security sensor option is a magnetic reed contact sensor, ideal for monitoring rack or room door access.
The power sensor will detect the presence or otherwise of utility power.
The Universal sensor is an interface cable that can be connected to any device offering an open or closed or high/low output. interSeptor can monitor this output for changes in state and alarm accordingly. The Universal sensor can be connected to equipment such as generators, air conditioning units, printers, UPS, security systems, fire alarm systems, etc.
interSeptor Pro is an SNMP v1/3 device and will therefore integrate with many NMS programs available.
PRTG by Paessler currently includes interSeptor and interSeptor Pro 8, 16 and 24 port templates that can be used to automatically add an interSeptor or interSeptor Pro and all of its Temperature and Humidity sensors.
SNMPc by Castle Rock currently includes interSeptor and interSeptor Pro MIBs for quick and easy Jacarta Temperature and Humidity device integration.
WhatsUp Gold by Ipswitch currently includes interSeptor and interSeptor Pro MIBs for quick and easy Jacarta Temperature and Humidity device integration.
We can provide the command and configuration file to monitor the interseptor with Nagios to integrate Temperature and Humidity values. Please contact us if you require these files.
We can provide a generic configuration file for MRTG to collect Temperature and Humidity values from an interSeptor. Please contact us if you require this file.
Mutiny by Mutiny Ltd. currently includes interSeptor, interSeptor Pro, interSeptor iMeter, PowerFox8 and SP8 MIBs for quick and easy Jacarta Sensor integration.
Other Network Management Systems into which Jacarta products can be integrated include:
Microsoft Operations Manager (MOM)