Firmware

Firmware Updates

Please see below the latest firmware versions for the iMeter, interSeptor and interSeptor Pro devices. If you wish to upgrade the firmware on your SP-device (SP2, SP8, SP8-x20, SP8-x60) please contact us at support@jacarta.com so that we can provide you with the most up-to-date firmware for your particular device.

If you have any queries regarding compatibility and functionality, please don’t hesitate to contact us before performing the upgrades.

iMeter

The latest iMeter firmware is v1.13. This firmware is suitable for all iMeter devices that have an SD-card port in the top-left corner on the front panel. If your device does not have this port please contact us for assistance.

The iMeter is easily upgraded via the web-browser interface by selecting Settings > System Administrator > System Maintenance > System Firmware Upgrade.

  • Before upgrading your device we recommend taking a backup of your current settings should they be lost. You can do this by selecting  Settings > System Administrator > System Maintenance > Backup

You can download v1.13 HERE

 

interSeptor

The latest interSeptor firmware is v2.13b4. This firmware is suitable for all interSeptor v2 devices housed in a plastic case. If you have an older v1 device housed in a metal case please contact us for assistance.

The download below includes the latest interSeptor firmware version, along with instructions and the upgrade tool.

  • You shouldn’t lose any of your interSeptor settings during the upgrade but we do recommend taking screengrabs of your existing device properties (email config, sensor thresholds, etc.) should you need them after the upgrade.
  • Please note that in some cases you may have to temporarily disable your firewall to complete the upgrade process.

You can download v2.13b4 HERE

 

interSeptor Pro

The latest interSeptor Pro firmware is v1.09b3

The download above includes the latest interSeptor Pro firmware version, along with instructions and the upgrade tool.

  • You shouldn’t lose any of your interSeptor Pro settings during the upgrade but we do recommend taking screengrabs of your existing device properties (email config, sensor thresholds, etc.) should you need them after the upgrade.
  • Please note that in some cases you may have to temporarily disable your firewall to complete the upgrade process.
  • Due to security upgrades in this firmware release the device does take a little longer to boot upon re-powering. Using the discovery/upgrade tool you will be able to find the device immediately but the web-browser won’t be accessible for approximately 5 minutes.

You can download v1.09b3 HERE

 

 

 

 

 

 

Please note that all firmware upgrades are performed at your own risk.